Tools & Fixings

Shipping class: Small

  • 8mm Wood Drill

    8mm Wood Drill

    —

    by

    The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs. This Faithfull Lip & Spur Wood Drill Bit has the…

  • 8mm x 10mm Steel Staples (1000) – Pack Qty 1

    8mm x 10mm Steel Staples (1000) – Pack Qty 1

    —

    by

    Draper 8mm Staples (1000) for DIY Series Mini Staple Gun/Tacker (91-7070).

  • 956R Sabre Saw Blade Nail Embedded Wood Cutting 225mm Pack of 2

    956R Sabre Saw Blade Nail Embedded Wood Cutting 225mm Pack of 2

    —

    by

    Irwin IRW10506430 Sabre Saw Blades 956R Nail Embeded Wood Pack of 2. Cuts nail embedded wood. Bi-Metal reciprocating blade. Ideal construction. Faster cutting. Longer lasting. IRWIN, 133 years of ingenuity and high quality.

  • 9mm x 120mm Hex Shank Masonry TCT Drill Bits

    9mm x 120mm Hex Shank Masonry TCT Drill Bits

    —

    by

    The DEWALT Rotary/Percussion Masonry Drill Bits have 130? Douglas Form carbide tips. They are ideal for drilling anchor, plastic, fixing or pipework clearance holes. Suitable for drilling masonry, brick/blockwork and stone. Product may differ from image.

  • A2 Arbor + Pilot 32mm – 152mm

    A2 Arbor + Pilot 32mm – 152mm

    —

    by

    Arbor with pilot drill for hole-saws. Hole saw size: ?32-210mm.

  • A2 Arbor to suit 32-210mm Holesaws

    A2 Arbor to suit 32-210mm Holesaws

    —

    by

    The Starrett A2 Arbor is suitable for use with holesaw sizes ranging from Ø32-210mm. Fitted with a 6.5mm/1/4in pilot drill, with set screw in the arbor body allowing easy replacement of the pilot drill. For use with FCW Holesaws. Shank Size: 7/16in hex suitable to fit 1/2in capacity chuck. Use with holesaws H0114 – H210…

  • A4 Arbor To Suit 14mm-30mm Holesaws

    A4 Arbor To Suit 14mm-30mm Holesaws

    —

    by

    Hole Saw arbor supplied with 6.35mm (1/4?) pilot drill. Shank size 8.75mm (11/32?). Screw thread 1/2?-20. Screw thread 1/2?-20.

  • Adjustable Pin Spanner

    Adjustable Pin Spanner

    —

    by

    ? Suitable for any size of grinder ? Adjustable from 15-57mm ? Hardened steel ? Flat handle base that can be used as a screwdriver ? Weight: 0.195kg ? Dimensions: 265 x 90 x 35mm

  • Air Line Whip Hose, 600mm, 1/4″ BSP

    Air Line Whip Hose, 600mm, 1/4″ BSP

    —

    by

    Health and Safety Executive guidance regulations recommend a flexible isolating hose to be used between the air tool and coupling, thus isolating the tool’s vibration. Supplied with PCL adaptor and appropriate male tailpiece. Manufactured to BS5118 specifications. Health and Safety Executive guidance regulations recommend a flexible isolating hose to be used between the air tool…

  • All Hard High Speed Steel Hacksaw blades 10? – 24TPI

    All Hard High Speed Steel Hacksaw blades 10? – 24TPI

    —

    by

    Manufactured entirely from top quality High Speed Steel. Each blade is precisely hardened throughout its entire width. A rigid, All Hard HSS hacksaw blade for superb highly accurate metal cutting performance. Hardening process throughout ensures a strong rigid back to the blade and straight accurate cut time after time. Blade stays sharp for long life.…

  • All Hard High Speed Steel hacksaw blades 10? – 18TPI

    All Hard High Speed Steel hacksaw blades 10? – 18TPI

    —

    by

    Manufactured entirely from top quality High Speed Steel. Each blade is precisely hardened throughout its entire width. A rigid, All Hard HSS hacksaw blade for superb highly accurate metal cutting performance. Hardening process throughout ensures a strong rigid back to the blade and straight accurate cut time after time. Blade stays sharp for long life.…

  • Aluminium Alloy Blind Rivets 2.4mm (3/32″) Pack of 50

    Aluminium Alloy Blind Rivets 2.4mm (3/32″) Pack of 50

    —

    by

    This 2.4mm diameter by 5.8mm length variant provides the smallest rivet size in the Draper aluminium range, perfect for delicate sheet metal work and applications requiring minimal grip thickness. The compact dimensions make these rivets ideal for thin gauge materials such as automotive trim, lightweight panels, and precision fabrication where larger fasteners would be unsuitable.…

  • Aluminium Contact Tip 1.2mm MB25/36 – Pack of 5

    Aluminium Contact Tip 1.2mm MB25/36 – Pack of 5

    —

    by

    • Pack of 1.2mm ally contact tips suitable for use with Powermig® 2750/3500/4500. • Compatible with MB25/36 Torches.

  • Aluminium Multi-Grip Rivet Standard Flange 3.2 x 10mm Pack of 500

    Aluminium Multi-Grip Rivet Standard Flange 3.2 x 10mm Pack of 500

    —

    by

    ? Aluminium multi-grip rivets. ? Standard flange. ? Manufactured to DIN 7337.

  • Aluminium Oxide flap wheel on 6mm shaft, 80 Grit, 60 x 30mm

    Aluminium Oxide flap wheel on 6mm shaft, 80 Grit, 60 x 30mm

    —

    by

    ? Aluminium oxide abrasive flap wheel with ?6mm shaft. ? Suitable for use with power drills. ? Supplied in pack of 5. ? ?60 x 30mm. ? 80Grit. ? Max. rpm: 12,700. ? Max. Operating Speed: 40m/s.

  • Aluminium Tape 75mm x 45m

    Aluminium Tape 75mm x 45m

    —

    by

    The Everbuild Aluminium Tape is made from heat and light reflective Aluminium Foil. It is heat resistant to 180?C and flame retardant to Class O. It has excellent moisture resistance, and is ideal for use as a vapour barrier between foil faced insulation panels in roof and wall applications, duct sealing on all types of…

  • Analogue Multi Tester

    Analogue Multi Tester

    —

    by

    Seven ranges of DC and four ranges of AC positions. Easy to read and use. Pocket size, ideal for testing electrical and electronic circuits.

  • Arbor with Pilot Drill for Holesaws – 14mm – 30mm

    Arbor with Pilot Drill for Holesaws – 14mm – 30mm

    —

    by

    ? Arbor with pilot drill for hole-saws ? Shank size: 7/16-inch hex ? Hole saw size: ?14-30 mm.